Wiring the Test CP

Joystick Wiring

IPAC Wiring

Started off by wiring all the Ground connectors to the IPAC. This gave me some good practice in cutting, stripping and connecting the Quik Connects. Next I connected each button to its assigned connection on the IPAC and after this I did the same with the Joystick. I was really eager to test the CP now so I hooked it all up and it worked, well except for the small problem of me wiring the Joystick around the wrong way, I had the Left and Right & Up and Down connected opposite as I forgot the Joystick actually presses the opposite microswitch.

Button Wiring